DCY 8502 XB1
Dryer
User Manual
2960310884_KM/070514.0837
1 Important safety and environmental instructions
This section contains safety instructions that will help protect from risk of
personal injury or property damage. Failure to follow these instructions shall
void any warranty.
1.1 General safety
•Dryer can be used by the children at the age of 8 and over and the
persons with physical, sensory or mental disorders or unlearned or
inexperienced people as long as they are attended by a person who will be
responsible for their safety or who will instruct them accordingly about use
of the product. Children should not tamper with the machine. Cleaning and
user maintenance works should not be carried out by the children unless
they are attended by someone.
•Adjustable feet should not be removed. (See 2.1 Overview) The gap
between the dryer and the surface should not be reduced by the materials
such as carpet, wood and tape. This will cause problems with the dryer.
•Always have the installation and repairing procedures carried out by the
Authorized Service Agent. Manufacturer shall not be held liable for
damages that may arise from procedures carried out by unauthorized
persons.
•Never wash the dryer by spraying or pouring water onto it! There is the risk
of electric shock!
1.1.1 Electrical safety
A Electrical safety instructions should be followed while electrical
connection is made during the installation.
•Connect the dryer to a grounded outlet protected by a fuse at the value
specified on the type label. (See 2.1 Overview) Have the grounding
installation performed by a qualified electrician. Our company shall not
be liable for any damages that will arise when the dryer is used without
grounding in accordance with the local regulations.
•The voltage and allowed fuse protection is stated on the type label plate.
(See 2.1 Overview)
Dryer / User Manual
3 / 28 EN
Important safety and environmental instructions
•The voltage specified on the type label must be equal to your mains
voltage. (See 2.1 Overview)
•Unplug the dryer when it is not in use.
•Unplug the dryer from the mains during installation, maintenance, cleaning
and repair works.
•Do not touch the plug with wet hands! Never unplug by pulling on the
cable, always pull out by grabbing the plug.
•Do not use extension cords, multi-plugs or adaptors to connect the dryer to
power supply in order to decrease the risk of fire and electric shock.
•Power cable plug must be within easy reach after installation.
B Damaged mains cable should be changed notifying the Authorized
B If the dryer is faulty, it must not be operated unless it is repaired
Service.
by an authorized service agent! There is the risk of electric shock!
1.1.2 Product safety
Points to be taken into consideration for fire hazard:
Below specified laundry or items must not be dried
in the dryer considering fire hazard.
•Unwashed laundry items
•Items soiled with oil, acetone, alcohol, fuel oil, kerosene, stain
removers, turpentine, paraffin or paraffin removers must be
washed in hot water with plenty of detergent before being dried
in the dryer.
For this reason especially the items containing the above
specifiedstains must be washed very well, to do thisuse adequate
detergent and choose a high washing temperature.
Dryer / User Manual
4 / 28 EN
Important safety and environmental instructions
Below specified laundry or items must not be dried in the dryer
due to the fire hazard:
•Garments or pillows bolstered with rubber foam (latex foam),
shower bonnets, water resistant textiles, materials with rubber
reinforcement and rubber foam pads.
•Clothing cleaned with industrial chemicals.
Items such as lighter, match, coins, metal parts, needle etc.
may damage the drum set or may lead to functional problems.
Therefore check all the laundry that you will load into your dryer.
Never stop your dryer before the programme completes. If you
must do this, remove all laundry quickly and lay them out to
dissipate the heat.
Clothes that are washed inadequately may ignite on their own and
even may ignite after drying ends.
Oil-affected items can ignite spontaneously, especially when
exposed to heat sources such as in a tumble dryer. The items
become warm, causing an oxidation reaction in the oil. Oxidation
creates heat. If the heat cannot escape, the items can become hot
enough to catch fire. Piling, stacking or storing oil-affected items
can prevent heat from escaping and so create a fire hazard.
If it is unavoidable that fabrics that contain vegetable or cooking
oil or have been contaminated by hair care products be placed in
a tumble dryer they should first be washed in hot water with extra
detergent - this will reduce, but not eliminate, the hazard.
•You must provide enough ventilation in order to prevent gases exiting from
devices operating with other types of fuels including the naked flame from
accumulating in the room due to the back fire effect.
Dryer / User Manual
5 / 28 EN
Important safety and environmental instructions
Underwear that contains metal reinforcements should not be
A dried in the dryer. Dryer may be damaged if metal reinforcements
come loose and break off during drying.
Use softeners and similar products in accordance with the
instructions of their manufacturers.
C
C
Always clean the lint filter before or after each loading. Never
operate the dryer without the lint filter installed.
•Never attempt to repair the dryer by yourself. Do not perform any repair
or replacement procedures on the product even if you know or have the
ability to perform the required procedure unless it is clearly suggested in
the operating instructions or the published service manual. Otherwise, you
will be putting your life and others' lives in danger.
•There must not be a lockable, sliding or hinged door that may block the
opening of the loading door in the place where your dryer is to be installed.
•Install your dryer at places suitable for home use. (Bathroom, closed
balcony, garage etc.)
•Make sure that pets do not enter the dryer. Check the inside of the dryer
before operating it.
•Do not lean on the loading door of your dryer when it is open, otherwise it
may fall over.
•The lint must not be allowed to accumulate around the tumble dryer.
1.2 Mounting over a washing machine
•A fixing device should be used between the two machines when installing
the dryer above a washing machine. The fitting device must be installed by
the authorized service agent.
•Total weight of the washing machine and the dryer -with full load- when
they are placed on top of each other reaches to approx. 180 kilograms.
Place the products on a solid floor that has sufficient load carrying
capacity!
Dryer / User Manual
6 / 28 EN
Important safety and environmental instructions
Washing machine cannot be placed on the dryer. Pay attention
to the above warnings during the installation on your washing
A machine.
Installation Table for Washing Machine and Dryer
Washing Machine Depth
Dryer Depth
62cm
60 cm 54 cm 50 cm 49 cm 45 cm 40 cm
Cannot
Can be Can be Can be Can be Can be Can be
installed installed installed installed installed installed
be
54 cm
60 cm
installed
Cannot Cannot
Can be Can be Can be Can be Can be
installed installed installed installed installed
be
be
installed installed
1.3 Intended use
•Dryer has been designed for domestic use. It is not designed for
commercial purposes and should not be used for other purposes.
•Use the dryer only for drying laundry that are marked accordingly.
•Manufacturer denies any liability for the damages arising from misuse or
faulty handling of the product.
•The service life of the dryer that you purchased is 10 years. During this
period, original spare parts will be available to operate the dryer properly.
1.4 Children's safety
•Packaging materials are dangerous to children. Keep packaging materials
away from children.
•Electrical products are dangerous for the children. Keep children away
from the product when it is operating. Do not let them tamper with the
dryer. Use the child-proof lock in order to prevent the children to tamper
with the dryer.
Dryer / User Manual
7 / 28 EN
Important safety and environmental instructions
Child-proof lock is on the control panel. (See 5.12 Child-proof
lock)
C
•Keep loading door closed even when the dryer is not in use.
1.5 Compliance with the WEEE Directive and
disposing of the waste product
This product does not contain the harmful and prohibited
substances which are specified in the “Control of the Waste
Electrical and Electronic Equipments” as published by Republic of
Turkey Ministry of Environment and Urbanization. It complies with
the WEEE Directive.
This product was made of high quality items and materials which
are recyclable and reusable. Therefore, do not dispose of the product at the
end of its service life with the domestic and other wastes. Take them to a
collection point for the recycling of the electrical and electronic devices. Ask
your local administration for these collection points. By delivering the used
products to recycling points, contribute to the protection of the environment
and the natural resources. For children's safety, cut the power cord and
break the locking mechanism, if any, of the loading door so that the product
will be nonfunctional before disposing it.
1.6 Packaging information
Packaging of the product is made of recyclable materials pursuant to
our national legislation. Do not dispose of the packaging wastes with the
domestic waste or other wastes, discard them to the dedicated collection
points designated by the local authorities.
Please visit the following website to get more information on the product.
Dryer / User Manual
8 / 28 EN
Important safety and environmental instructions
1.7 Technical Specifications
EN
Height (min./max.)
Width
Depth
Laundry drying capacity (max.)
Net weight (use of plastic lid)
Net weight (use of glass lid)
Voltage
84.6 cm / 86. cm*
59.5 cm
60.9 cm
8 kg**
38 kg
40 kg
Power
See type labels***
Main Model Code
* Min. height: Height with adjustable feet are closed.
Max. height: Height with adjustable feet are opened maximum.
** Dry laundry weight before washing.
*** For the location of the type label on the dryer see 2.1 Overview.
Technical specifications of the dryer are subject to specification
without notice to improve the quality of the product.
Figures in this manual are schematic and may not match the
product exactly.
Values stated on markers on the dryer or in the other published
documentation accompanying with the dryer are obtained in labo-
ratory in accordance with the relevant standards. Depending on
operational and environmental conditions of the dryer, these val-
ues may vary.
C
C
C
Dryer / User Manual
9 / 28 EN
2 Your Dryer
2.1 Overview
11
1
2
10
3
9
8
5
4
7
6
1. Top panel
2. Control panel
3. Loading door
4. Kick plate opening button
5. Ventilation grids
6. Adjustable feet
7. Kick plate
8. Type label
9. Lint filter
10. Water tank drawer
11. Power cord
Dryer / User Manual
10 / 28 EN
3 Installation
Before the calling the nearest Authorized Service for the
installation of the dryer, ensure that electrical installation
and water drain is appropriate referring to the user's
manual.(See 3.3 Connecting to the drain and 3.5
Electrical connection) If they are not suitable, contact
a qualified electrician and technician to make necessary
arrangements.
3.2 Removing the transportation safety
assembly
Remove the transportation safety
assembly before using the dryer for the
first time.
A
Open the loading door.
There is a nylon bag inside the drum that contains a piece
of styrofoam. Hold it from its section marked with XX XX.
Pull the nylon towards yourself and remove the transporta-
tion safety assembly.
Preparation of the dryer's location
as well as the electrical and waste
water installations is under customer's
C
responsibility.
Prior to installation, visually check if the
dryer has any defects on it. If the drier
A is damaged, do not have it installed.
Damaged products cause risks for your
safety.
3.1 Appropriate installation location
Install the dryer on a stable and level surface.
Dryer is heavy. Do not move it by yourself.
•
Operate your dryer in a well ventilated, dust-free
environment.
•
The gap between the dryer and the surface should
not be reduced by the materials such as carpet,
wood and tape.
Check that no part of the transportation
safety assembly remains inside the drum.
A
In products equipped with condenser unit, water accumu-
lates in the water tank during the drying cycle. You should
drain accumulated water after each drying cycle.
•
•
Do not cover the ventilation grills of the dryer.
There must not be a lockable, sliding or hinged door 3.3 Connecting to the drain
that may block the opening of the loading door in
the place where your dryer is to be installed.
Once the dryer is installed, it should stay at the
•
same place where its connections have been made. You can directly drain accumulated water through the wa-
When installing the dryer, make sure that its rear
wall does not touch anywhere (tap, socket, etc.).
Place the dryer at least 1 cm away from the edges
of other furniture.
Your dryer can be operated at temperatures
between +5°C and +35°C. If the operating
conditions fall outside of this range, operation of
the dryer will be adversely affected and it can get
damaged.
ter drain hose supplied with the product instead of periodi-
cally draining the water collected in the water tank.
Connecting the water drain hose
1-2 Pull hose at the behind of the dryer by hand in order
to disconnect it from where it is connected. Do not
use any tools to remove the hose.
•
•
3
Connect one end of the drain hose supplied with
the dryer to the connection point from where you
removed the hose of the product in previous step.
•
The rear surface of the tumble dryer shall be placed
against a wall.
4
Connect the other end of the drain hose directly to
the wastewater drain or to the washbasin.
Do not place the dryer on the power
cable.
B
Dryer / User Manual
11 / 28 EN
Installation
3.5 Electrical connection
1
2
4
For specific instructions for electrical connection required
during installation (see 1.1.1 Electrical Safety)
3.6 Transportation of the dryer
Unplug the dryer before transporting it.
Drain all water that has remained in the dryer.
If direct water drain connection is made, then remove the
hose connections.
3
We recommend carrying the dryer in
upright position. If it is not possible to
carry the machine in the upright position,
we recommend carrying it by tilting
A
towards the right side when looked from
the front.
Hose connection should be made in a safe
manner. Your drain house will be flooded if
the hose comes out of its housing during
water discharge.
A
Water drain hose should be attached to a
height of maximum 80 cm.
C
C
Make sure that the water drain hose is not
stepped on and it is not folded between the
drain and the machine.
3.4 Adjusting the feet
In order to ensure that the dryer operates more silently and
vibration-free, it must stand level and balanced on its feet.
Balance the machine by adjusting the feet.
Turn the feet to left or right until the dryer stands level and
firmly.
Never unscrew the adjustable feet from
their housings.
C
Dryer / User Manual
12 / 28 EN
4 Preparation
4.1 Laundry suitable for drying in the dryer
Always obey the instructions given on the garment tags. Dry only the laundry having a label stating that they are suit-
able for drying in a dryer and make sure that you select the appropriate programme.
LAUNDRY DRYING SYMBOLS
Drying
Symbols
Suitable for
dryer
No Iron
Do not dry-
clean
Sensitive /
Delicate dry
Do not dry
with dryer
Do not dry
Drying
Settings
Iron -
Iron at high
temperature
Iron at medium
temperature
Iron at low
temperature
Dry or Steam
IRON
200 0C
150 0C
110 0C
Maximum temperature
•
Sort out the laundry depending on their type and
thickness. Dry the same type of laundry together.
For example thin kitchen towels and table clothes
dries earlier than thick bathroom towels.(See 5.7
Programme selection and consumption table)
Follow the instructions in the user manual for
programme selection.
Do not open the loading door of the machine during
drying unless necessary. If you must certainly open
the loading door, do not to keep it open for a long
time.
4.2 Laundry not suitable for drying in the
dryer
Delicate embroidered fabrics, woolen, silk
garments, delicate and valuable fabrics,
airtight items and tulle curtains are not
C
•
•
suitable for machine drying.
4.3 Preparing laundry for drying
•
Laundry may be tangled with each other after
washing. Separate the laundry items before placing
them into the dryer.
•
•
•
Do not add wet laundry while the dryer is in
operation
•
•
Dry garments having metal accessories such as
zippers, inside out.
Fasten the zippers, hooks and buckles and button
sheets.
Clean the lint filter before or after each drying cycle.
(See 6.1 in Maintenance and cleaning)
Clean the condenser regularly at least once every
month or after every 30 drying cycles. (See 6.4 in
Maintenance and cleaning)
4.4 Things to be done for energy saving
Following information will help you use the dryer in an
ecological and energy-efficient manner.
•
Ventilate the room, where the dryer is located, well
during drying.
•
Spin your laundry at the highest speed possible
when washing them. Thus, the drying time is
shortened and energy consumption is reduced.(See
5.7 Programme selection and consumption
table)
Dryer / User Manual
13 / 28 EN
Preparation
4.5 Correct load capacity
Follow the instructions in the “Programme selection and
consumption table”. Do not load more than the capacity
values stated in the table.
It is not recommended to load the dryer
with laundry exceeding the level indicated
in the figure. Drying performance will
C
degrade when the machine is overloaded.
Furthermore, dryer and the laundry can get
damaged.
Following weights are given as examples.
Approximate weights
Laundry
(g)*
Cotton quit covers (double)
Cotton quit covers (single)
Bed sheets (double)
Bed sheets (single)
Large tablecloths
Small tablecloths
Tea napkins
1500
1000
500
350
700
250
100
700
350
150
300
200
500
350
700
100
125
Bath towels
Hand towels
Blouses
Cotton shirts
Shirts
Cotton dresses
Dresses
Jeans
Handkerchiefs (10 pieces)
T-Shirts
*Dry laundry weight before washing.
Dryer / User Manual
14 / 28 EN
5 Operating the product
5.1 Control panel
1
2
3
4
5
6
10
9
8
7
1. Programme Selection knob
2. Dryness Level Adjustment button
3. Audio Warning Level button
4. Display
6. Start/Pause button
7. End Time button
8. Favourite button
9. Timer Programmes Selection button
10. Anti-creasing button
5. On /Off/Cancel button
5.2 Display symbols
Dryness level
Audio warning Symbol
Condenser cleaning warning symbol
Filter cleaning warning symbol
Water tank warning symbol
Start / Pause symbol
Child lock warning symbol
End time symbol
Remaining time indicator*
Programme progress bar
Smart grid symbol
*Time that appears on display indicates the
remaining time until the end of the programme
and changes according to the dampness level
of the laundry and model of the dryer.
Steam tank warning symbol
Dryer / User Manual
15 / 28 EN
Operating the product
5.3 Preparing the machine
Additional programs may differ according
to the features of your machine.
1. Plug in your machine.
2. Place the laundry in the machine.
3. Press the On/Off/Cancel button for 1 second
(long).
4. When your machine is operated for the first time,
it starts with the declaration programme (wardrobe
dryness for cottons.)
C
To obtain better results from your
dryer, your laundry must be washed
C at suitable programmes and spun at
the recommended spin speeds in the
washing machine..
Pressing the On/Off/Cancel button
does not mean that the programme has
C started. Press Start / Pause button to
start the program.
ƒ
Jeans
Use this programme to dry your jeans that are spun at
high speeds in the washing machine.
5.4 Programme selection
ƒ
Mix
1. Decide the appropriate programme from the table
below which includes drying levels.
Use this programme to dry non-pigmenting synthetic and
cotton laundry items together.
2. Select the desired programme with the
Programme Selection knob.
ƒ
Sports
Use this programme to dry together the synthetic and
cotton laundry items and the laundry items made of
mixed fabrics.
Only the cotton laundry is dried at
normal temperature. Thick and multi
ƒ
Wool Refresh
layered laundry (towels, linens, jeans
and etc.) are dried in a way that they
Use this programme to ventilate and soften the woolen
laundry that can be washed in the washing machine. Do
not use to dry the laundry completely. Take out and venti-
late the laundry immediately after the programme is over.
Extra Dry
do not require ironing before being
placed in the wardrobe.
Normal laundry (tablecloths, under-
ƒ
Xpress
wear and etc.) are dried in a way that
they do not require ironing before
You can use this programme to dry your cotton laundry
that you have spun at high speeds in your washing
machine. This programme dries 1 kg cotton laundry (3
Shirts / 3 T-shirts) in 35 minutes.
Cupboard Dry
being placed in the wardrobe.
Normal laundry (shirts, dresses and
Iron Dry
ƒ
BabyProtect
etc.) are dried ready to be ironed.
This programme is used for baby clothes that bear mac-
hine dryable approval on its label.
For further programme details, see
"Programme selection and consumption
C table"..
ƒ
Daily
This programme is used to dry cottons and synthetics
daily, and lasts for 72 minutes.
5.5 Main programmes
ƒ
Shirt
Depending on the fabric type, the following main pro-
grammes are available.
This programme dries the shirts more sensitively and
creases them less and thus, helps to iron them more
easily.
ƒ
Cottons
Dry durable laundry with this programme. Dries at
normal temperature. It is recommended to use for your
cotton items (bed sheets, quilt covers, towels, bathrobes,
etc.).
There may be a little moisture on the
shirts at the end of the programme. We
C recommend you not to leave the shirts in
the dryer.
ƒ
Synthetics
Dry less durable laundry with this programme.
Recommended for synthetics.
ƒ
Delicates
You can dry your highly delicate laundry (silk blouses,
fine underwear, etc.) that are suitable for drying or
laundry which is advised to be hand-washed at a lower
temperature.
5.6 Additional programmes
For special cases, following additional programmes are
available in the machine.
Dryer / User Manual
16 / 28 EN
Operating the product
It is recommended to use a cloth bag
to avoid certain delicate garments
C and laundry from getting creased or
damaged. Take your laundry immediately
out of the dryer and hang them after the
programme ends in order to prevent them
being creased.
ƒ
Freshen Up
Only ventilation is performed for 10 minutes without
blowing hot air. You can air the clothes that have been
kept at closed environments for a long time and deodor-
ize unpleasant odors thanks to this programme.
ƒ
Timer programmes
You can select one of the 10 min., 20 min., 30 min., 40
min., 50 min., 60 min., 80 min., 100 min.,
120 min., 140 min. and 160 min. timer programmes to
achieve the desired final drying level at low temperatures.
With this programme, the machine dries
for the time selected regardless of the
C dryness level.
Dryer / User Manual
17 / 28 EN
Operating the product
5.7 Programme selection and consumption table
EN
Approximate
amount of
remaining
humidity
Spin speed in washing
machine (rpm)
Drying time
(minutes)
Programs
Capacity (kg)
Cottons / Coloreds
Extra dry
8
8
8
1000
1000
1000
% 60
% 60
% 60
154
142
120
A
Cupboard dry
Iron dry
A
A
Xpress 35’
Shirt
1,5
1.5
4
1200
1200
1200
1000
1000
600
%50
%50
%50
%60
%60
%50
%50
%60
35
45
90
90
100
6
Jeans
Mixed
4
Sport
4
Wool Refresh
Daily
1.5
4
1200
1000
72
80
BabyProtect
Synthetics
3
Cupboard dry
4
2
800
600
% 40
% 40
60
45
B
Delicates
Cupboard dry
B
Energy consumption values
Energy rating
star
Programs
Capacity (kg) Energy consumption value kWh per year
349
Cottons-Extra Dry*
8
2
* : Energy Label standard program (AS/NZS 2442)
All values given in the table have been fixed according to standard laboratory conditions. These values may deviate
from the table according to the laundry type, laundry spin speed, environmental conditions and voltage fluctuations.
Dryer / User Manual
18 / 28 EN
Operating the product
Dryness level adjustment selection
5.8 Auxiliary functions
Dryness level adjustment button is used to adjust
the required dryness level. Programme duration can
change depending on the selection.
Audio Warning
The machine will give an audio warning when the
programme comes to an end. Use the Audio Warning
Level button to adjust the sound level.
You can activate this function only before
the programme has started.
You can change the sound level either
before the programme starts or while the
C programme is in progress.
C
Drying level damp
Volume level low
Volume level high
Drying level normal
Drying level extra
Dryer / User Manual
19 / 28 EN
Operating the product
Anti-creasing
Anti-creasing symbol will illuminate at the
end of the programme if Anti-creasing
Anti-creasing programme duration may be
C function is activated.
changed with the Anti-creasing selection button. You
can use Anti-creasing function to prevent laundry from
creasing if you will not take the laundry out after the
program has come to an end. This programme rotates the
laundry in every 240 second for selected time to prevent
creasing.Following images identify the level changes.
Favourite selection button
A programme with the set auxiliary function is saved
with Favourite selection button.When the product is
switched on and off, features of the saved programme is
displayed by means of Favourite selection button.
1. Select the programme with the programme knob;
select the auxiliary functions such as Anti-creasing,
Dryness Level etc.
2. Press and hold the Favourite selection button for
about 3 seconds. Features of set programme will be
saved.
Anti-creasing 0 minute
Anti-creasing 30 minute
Anti-creasing 60 minute
5.9 Warning symbols
Warning symbols may differ according to
the model of your machine.
C
Lint filter cleaning
When the programme is completed, a warning symbol
will appear to remind that the filter needs to be cleaned.
If the Filter Cleaning symbol flashes
continuously, refer to “Troubleshooting”
C section.
Water tank
When the programme is completed, a warning symbol
will appear to remind that the water tank needs to be
drained.
If the water tank becomes full while the programme is
running, the warning symbol will start to flash and ma-
chine will pause. Drain the water in the water tank and
press Start / Pause button to resume the programme.
The warning symbol turns off and the programme re-
sumes operating.
Anti-creasing 120 minute
Press Anti-creasing button to activate
this function.
C
Dryer / User Manual
20 / 28 EN
Operating the product
Changing the End time
If you want to change the time during countdown:
1. Press On/Off/Cancel button for 3 seconds to can-
cel the programme. Restart the machine and repeat
the Delay Setting procedure for the desired time.
2. When your machine is operated for the first time,
it starts with the declaration programme (wardrobe
dryness for cottons.
Cleaning the condenser
Warning symbol flashes with certain intervals to remind
that the condenser needs to be cleaned.
Cancelling the end time
If you want to cancel the End time countdown and start
the programme immediately:
1. Press On/Off/Cancel button for 3 seconds to can-
cel the programme.
Loading door open
2. Press On/Off/Cancel button to start the pro-
This warning symbol Pause appears and programme
progress symbol flashes when the loading door of the
dryer is open.
gramme you have previously selected.
5.10 Starting the programme
Press the Start/Pause button to start the program.
Start symbol will light up to indicate that the pro-
gramme has started and ":" symbol in the middle of the
remaining time will keep flashing. Progress of Programme
Symbol flashes on the screen.
5.11.Progress of programme
End time
With the End Time function, the end time of the pro-
gramme may be delayed up to 24 hours.
1. Open the loading door and put the laundry in.
2. Select the drying programme, spin speed and, if
required, the auxiliary functions.
3. Press End time button to set the desired time delay.
End time symbol flashes on the display. (When the
button is pressed on, End time proceeds continu-
ously)
4. Press Start / Pause button. End time starts count-
down and Start symbol lights up on the display. The
“:” in the middle of the displayed delay time flashes.
5.12 Child Lock
Machine is equipped with a Childproof Lock which
prevents interfering with the current programme flow
by pressing any button. All buttons except the On/Off/
Cancel button on the control panel are deactivated when
the Child-proof Lock is active.
In order to activate the Childproof Lock, press Anti-
creasing button for 3 seconds.
To start a new programme after the current programme
is over or to interrupt the current programme, the Child-
proof Lock should be deactivated. Press the same button
for 3 seconds again to deactivate the Child-proof
Lock.
Additional laundry may be loaded / taken
out during the End time. At the end of
C the countdown process, end time symbol
disappears, drying process starts and the
programme duration is displayed. The
time on the display is the total of normal
drying time and end time.
Lock symbol will appear on the display
when the Child-proof Lock is activated.
C
Dryer / User Manual
21 / 28 EN
Operating the product
If you select a new programme by turning
the Programme Selection knob while
C your machine is in Pause mode, then
the current program is aborted and new
programme information is displayed.
CAUTION: Do not touch the inner surface
of the drum when adding or taking out
laundry while a programme is running.
Surfaces of the drum are hot.
Child-proof Lock is deactivated when the
machine is switched off and on with On/
5.14 Canceling the programme
C Off/Cancel button.
If you want to stop drying and cancel the programme for
any reason after the machine has started to run, press
and hold the On/Off/Cancel button for 3 seconds.
When the Child-proof Lock is activated:
Display symbols will not change even if the position of
Programme Selection knob is changed while the machine
is running or in halt.
CAUTION: As the inside of the machine
will be excessively hot when you cancel
A the program while the machine is
running, activate the ventilation program
to cool it down.
5.13 Changing the programme after it has
started
After the machine starts, you can change the selected
programme and dry your laundry in a different pro-
gramme.
5.15 End of programme
Lint Filter Cleaning and Water Tank warning symbols
light up in the programme follow-up indicator when the
programme comes to an end. The loading door can be
opened and the machine becomes ready for a second
cycle.
1. If you want to select Extra Dry programme instead
of Iron Dry programme, press and hold the Start /
Pause button to stop the programme.
2. Select Extra Dry programme by turning the
Programme Selection knob.
3. Press the Start/Pause button to start the program.
Adding / removing laundry in Pause mode
In order to add or take out laundry after the drying pro-
gramme has started:
1.Press Start/Pause button to switch the machine to
Pause mode. Drying process will stop.
Press On/Off/Cancel button to switch off the machine.
2.While in Pause mode, open the loading door, add or
take out laundry and close the loading door.
3.Press the Start/Pause button to start the program.
Any laundry added after the drying
process has started may cause the
C clothes that are already dried in the
machine intermingle with wet clothes and
the result will be wet laundry after the
drying process is over.
If Anti-creasing function is activated and
the laundry is not taken from the machine
C at the end of the programme, 2-hours
(depends on selection) Anti-creasing
programme is activated.
You may repeat laundry adding or
removing process as many times as
C you desire during drying. However, this
process will increase the programme time
and energy consumption since the drying
process will be interrupted repeatedly.
Therefore, it is recommended to add
laundry before the drying programme has
started.
Clean the lint filter after each drying.
(See "Lint Filter and Loading Door Inner
C Surface")
C
Drain the water tank after each drying
cycle. (See "Draining the water tank")
Dryer / User Manual
22 / 28 EN
6 Maintenance and cleaning
Service life of product extends and frequently experi-
enced problems will be reduced if it is cleaned at regular
intervals.
6.1 Cleaning Lint Filter / Loading Door
Inner Surface
Lint and fiber released from the laundry to the air during
the drying cycle are collected in the Lint Filter.
Such fiber and lint are generally formed
during wearing and washing.
•
Clean the entire inner surface of the loading door
and loading door gasket with a soft damp cloth.
C
A
Always clean the lint filter and the inner
surfaces of the loading door after each
drying process.
You can clean the lint filter housing with a
vacuum cleaner.
C
To clean the lint filter:
•
•
Open the loading door.
Remove the lint filter by pulling it up and open the
lint filter.
•
•
Clean lint, fiber, and cotton raveling by hand or with
a soft piece of cloth.
Close the lint filter and place it back into its housing.
6.2 Cleaning the sensor
There are dampness sensors in the dryer that detect
whether the laundry is dry or not.
To clean the sensors:
•
•
Open the loading doorof the dryer.
Allow the machine to cool down if it is still hot due
to the drying process.
•
Wipe the metal surfaces of the sensor with a soft
cloth, dampened with vinegar and dry them.
•
A layer can build up on the filter pores that can
cause clogging of the filter after using the dryer for a
while. Wash the lint filter with warm water to remove
the layer that builds up on the lint filter surface. Dry
the lint filter completely before reinstalling it.
Clean metal surfaces of the sensors 4
times a year.
C
Dryer / User Manual
23 / 28 EN
Maintenance and cleaning
Do not use metal tools when cleaning
metal surfaces of the sensors.
C
A
Never use solvents, cleaning agents or
similar substances for cleaning due to the
risk of fire and explosion!
•
Drain the water in the tank.
6.3 Draining the water tank
Dampness of the laundry is removed and condensed dur-
ing drying process and the water that arise accumulates
in the water tank. Drain the water tank after each drying
cycle.
•
•
If there is lint accumulation in the funnel of the
water tank, clean it under running water.
Place the water tank into its seat.
Condensed water is not drinkable!
If the direct water draining is used as
an option, there is no need to empty the
water tank.
A
C
Never remove the water tank when the
program is running!
A
If you forget to drain the water tank, the machine will stop
during the subsequent drying cycles when the water tank
is full and the Water Tank warning symbol will flash. If this
is the case, drain the water tank and press Start / Pause
button to resume the drying cycle.
To drain the water tank:
Pull the drawer and remove the water tank carefully.
Dryer / User Manual
24 / 28 EN
Maintenance and cleaning
6.4 Cleaning the condenser;
Hot and humid air in the condenser is cooled with the
cold air from the room. Thus, the humid air circulating in
your dryer is condensed and then pumped into the tank.
Clean the condenser after every 30 drying
cycles or once a month.
C
To clean the condenser:
1. If a drying process has been carried out, open the door
of the machine and wait until it cools down.
5. Place the condenser in its housing. Fasten the 2 locks
and make sure that they are seated securely.
2. Unlock the 2 condenser locks after opening the kick
plate.
6. Close the kick plate cover.
3. Pull out the condenser.
4. Clean the condenser by applying pressurized water
with a shower armature and wait until the water
drains.
Dryer / User Manual
25 / 28 EN
6 Suggested solutions for problems
Drying process takes too much time
•
Meshes of the filter may be clogged. Wash with water.
Laundry comes out wet at the end of drying.
•
•
Meshes of the filter may be clogged. Wash with water.
Excessive laundry might have been loaded in. Do not load the dryer in excess.
Dryer does not switch on or the programme does not start. Dryer is not activated when set.
•
•
•
It might have not been plugged in. Make sure that the machine is plugged in.
The loading door may be ajar. Make sure that the loading door is properly closed.
Programme might have not been set or the "Start/Pause/Cancel" button might have not been pressed. Make
sure that the programme has been set and it is not in “Pause” mode.
•
"Childproof lock" might have been activated. Deactivate the childproof lock.
Programme has been interrupted without any cause.
•
•
The loading door may be ajar. Make sure that the loading door is properly closed.
Electricity may be cut off. Press "Start/Pause/Cancel" button to start the programme.
Laundry has shrunk, become felted or deteriorated.
•
A programme suitable for the laundry type might have not been used. Dry only the laundry which is suitable for
drying in dryer after checking the labels on your clothes.
•
Select a programme with suitable low temperature for the laundry type to dry your clothes.
Drum lightning does not come on.
•
•
Dryer might have not been started by using the "On/Off" button. Make sure that the dryer is on.
Bulb may have blown. Call the authorized service to replace the bulb.
“Final / Anti-creasing” symbol flashes.
•
The 2-hour anti creasing programme to prevent laundry from creasing might have been activated. Turn off the
dryer and take out the laundry.
“Final / Anti-creasing” symbol is on.
Programme has come to an end. Turn off the dryer and take out the laundry.
Water comes out the cover.
Clean the entire inner surface of the cover and door gasket.
Cover opens spontaneously.
Push it until you hear that it is closed.
•
•
•
For products with a condenser:
“Water tank” warning symbol is on.
•
•
Water may be full.
Anti-creasing programme might be running. Drain the water in the tank.
“Filter cleaning” symbol is on.
Filter might have not been cleaned. Clean the cover filter.
“Condenser cleaning” symbol is on.
•
•
Filter drawer/Condenser might have not been cleaned. Clean the filters in the condenser/filter drawer under the
kick plate.
Call an authorised service if the problem persists.
A
Dryer / User Manual
26 / 28 EN
Dryer / User Manual
|