COLOUR TELEVISION
Operating Instructions
Television
Thank you for buying this television which is designed to give you many years of
satisfactory service.
You may already be familiar with using a television but do please take time to read
these instructions. They are designed to familiarise you with the unit’s many new
features and to ensure you get the very best out of your purchase.
ꢀ
Special features
• Automatic Programming
• 100 Programme Memory
• Available for Cable Channels (A decoder may be required)
• Manual Fine Tuning
• Skipping back to the last channel you have started to zapp via only one button
(SWAP).
• 16:9 picture format
• Scart Socket: Video cassette recorder, satellite receiver, video disc player,DVD, TV
games or a home computer can be connected to this AV socket with an appropriate
connecting cable.
• Normalization system to recall the setting in memory after the colour,contrast,
brightness setting have been changed.
• Automatic Volume Limiting.
• Infrared Remote Control.
• Your TV will automatically switch off if it’s been programmed from 15 to 120 minutes.
• Automatically switch to Stand by five minutes after a channel ceases to transmit.
• Multi language menu system.
• Naming the channels (Automatic with ATS).
• NTSC playback.
• S-VHS via Scart.
• ATS: Automatic Tuning System with country selection (*).
• Audio/Video RCA sockets (*).
• Headphone socket (*).
• Teletext reception (*).
• Zapping (*).
• On Timer (*).
• I.P.S.: Intelligent Programme Switch: You can set your TV to skip to a specific
channel at a specific time. It works also as an alarm function (*).
• Childlock (*).
Please Note: Zapping, I.P.S., Childlock are optional if ATS exists.
(*) : These features are not available in all models.
2
Safety is Important
Your safety and the safety of others is important. Please, therefore, ensure you read
the Safety instructions before you operate this television.
ꢁ Safety instructions
Read all the safety instructions before first use of your TV.
• Position the television so that direct light does not fall on the screen.
Excessive light will cause a washed out effect.
• Position the power supply lead and other leads so that they are not likely
to be walked on or pinched by things placed on or against them.
• Do not use the appliance in humid or damp conditions.
Do not allow the appliance to get wet, i.e. dripping or splashing, as this
may be dangerous. Do not place water filled objects, such as vases and
flower top on top of the appliance.
• Make sure that no naked flame sources, such as lighted candles, are
placed on top of the appliance.
• Do not place the television near heat sources such as radiators, ovens,
stoves, etc.
• Do not use the television near any apparatus that produces a magnetic
field such as HI-FI speakers or electric motors otherwise colour purity may
be affected.
• The heat built up in the set escapes through ventilation holes, so do not
cover the set by drapes, clothes etc. that may block air circulation. Do not
place the television on carpet or soft furnishings.
• NEVER let children push anything into the holes or slots on the case.
• Clean the TV Screen using a slightly damp cloth or chamois leather. Never
use abrasive cleaning agents like liquid or aerosol cleaners.
• Remove the mains plug from the socket outlet while cleaning.
• If you wish to place the television on a shelf or in a wall unit always ensure
there is a minimum air gap of 8 cm around the top, sides and rear of the
television, to assist ventilation.
• Your TV set is designed to operate with mains voltages 230V AC; 50Hz.
Do not connect your TV set to power sources other than the mains supply.
3
ꢂ
Getting started
Remove your Television carefully from the
box. You may wish to store the packaging
for future use.
Press the Power button on the
front of the TV. The standby
indicator will illuminate.
Press the Program up, Program
down button or Numeric Buttons
on the remote handset to switch
the TV on.
In the box
Inside your this package you should have:
• Television
• Remote control
• User guide
• AAA batteries x 2
The standby indicator remains on.
The picture will appear after a few
seconds.
Read these instructions before use.
Switch off
Aerial connection
Press the Standby button to switch
the TV to standby. The standby
indicator will brighten.
To connect an aerial, plug the aerial lead
into the aerial socket on the rear of the
TV.
Please Note
Do not leave the television on standby
unattended or overnight.
Switching the TV on for the first time
To install your TV, please read the sections
“Tuning the television”.
Battery fitting
Insert the 2 AAA Batteries supplied into
the compartment on the rear of the remote
control, ensure you follow the polarity
diagram inside the compartment.
You can use an outdoor or indoor aerial.
However, if you use an indoor aerial the
quality of the reception may be reduced
and adjustment of the aerial may be
required when changing programs.
Please note
If you live in a poor reception area or use
an indoor aerial you may experience loss
or corruption of teletext transmissions.
Switching on
Mains power
Connect the mains plug into the mains
socket and switch on.
Connect the TV mains plug into your
domestic mains socket outlet (230 V 50
Hz AC).
Please Note
When your TV is not in use disconnect
the plug from the mains power supply.
4
ꢃ Control Unit
Front and rear panel
14” (37 cm), 15” (38 cm) 20” (51 cm) and 21” (55 cm) TV sets:
External Connections: (Front or side)
Front
Program/Volume increase button
Program/Volume selection button:
This button allows you to select
program or volume mode on the
front panel.
Side
V
A
Headphone socket
Left audio RCA/
Mono RCA (White)
Program/Volume decrease button
A
V
20” (51 cm), 21” PF (55 cm) TV sets:
Video RCA (Yellow)
Volume decrease button
External connections: (Rear)
AV1 scart
Volume increase button
Program decrease button
Aerial socket
Power cable
Program increase button
Please note:
General
The Audio/Video RCA and Headphone socket can
be placed on the front panel or on the right-hand
side of the cabinet depanding to the model of your
TV.
Power ON/OFF switch
Stand by indicator
1.
2.
3.
4.
5.
6.
7.
8.
9.
MUTE button
Remote control
Ten key program button
Two digit program button (-/--)
MENU button
Program up button
Volume decrease button
Return to selected programme button (SWAP)
Information button (i)
STAND-BY button
10.
11.
12.
13.
14.
15.
16.
AV-TV selection button
OK button
Volume increase button
Program down button
16:9 picture format button
Sleep timer button
Normalization button
For Teletext Function (Opt.)
15. Yellow fastext button
16. Blue fastext button
17. Teletext/TV select button
18. Enlarge button
19. UPDATE button
20. MIX button
21. Green fastext button
22. Red fastext button
23. STOP button
24. SUB-PAGE button
25. REVEAL button
5
ꢄ
Using the TV
Press the Mute button again to
restore the sound. The symbol
will disappear.
TV controls
Program selection
Pressing Volume down buttons
will decrease the volume without
restoring .
But pressing the Volume up
button will increase the volume
with restoring.
Press the Program up or
Program down buttons on the
TV or remote control or press a
Numeric button to select a
programme.
To select a programme whose
number is greater than 9 using
the numeric buttons, press the
-/-- button first and then press the
two Numeric buttons. For
example, to select programme 12,
press the -/-- button followed by
1 and then 2.
ZAPP Function (Optional)
Select the programme you would
like to recall by pressing SWAP
button. Selected programme
number will appear on the upper
left side of the screen. Watching
any programme, you can recall
the selected one by pressing
SWAP button again. If you press
SWAP button again, you can
recall the last programme you
watched. You can cancel ZAPP
function by pressing INFO button.
Optionally you can also select a
program by pressing in the OK
button (by ATS included models
only).
Press the OK button and program
list will appear on the screen with
programme numbers on it.
SWAP
SWAP
ZAPP: PR01
PR11 PR12
PR13
SORTING
P 00
P 01
P 02
P 03
P 04
P 05
P 06
P 07
P 08
P 09
TRT1
ATV
SWAP
Allows you to swap between the
program you are watching and the
last selected program. i.e. If you
were watching Program 1 and
change to Program 11, press the
SWAP button to go back to
Program 1. Press it again to return
to Program 11.
SKIP
MOVE
DELETE
NAME
Use the Program up and
Program down buttons to scroll
through the program list.
Press the MENU, TXT, 16:9 or i
button to close the program list.
SWAP
SWAP
PR01
PR11
PR01
Note: If Zapping function is available
SWAP function will not work.
Info
By pressing the “WHITE (i)” button
the programme number and
programme name (if it is exist) will
appear on the screen. This will
disappear automatically after a few
seconds.
Volume
Press the Volume up
or
Volume down button on the front
panel of the TV or press the “ Vol“
or “Vol “ button on the remote
control. A sound level bar will
appear on the screen.
AV
Mute
For use when you are connecting an
external source to your TV (Video
recorder, DVD player etc.) via the SCART
sockets or RCA sockets.
To mute the sound press the Mute
button on the remote control.
A loudspeaker symbol will appear
onthe screen.
See ‘Connecting external equipment’.
6
Press the AV/TV button to select
your input as follows:
Starting with Program P1, tune in
the first channel as follows:
Use the Program up button to
select SEARCH.
1 AV1 when using SCART socket 1.
2 AV1 S-VHS for S-Video equipment to
scart 1 (S-VHS / Scart adapter is needed).
3 AV2 when using the RCA sockets of
the TV. (Optional)
Press the Volume up or Volume
down button to start the tuning
search.
Press the AV/TV button again to
return to TV.
The search arrow will appear.
When the search finds a strong searching.
The picture will appear, channel signal it
will stop.
Tuning the television
There are two ways of tuning your
television:
• Manual, where you control the tuning
process or Autoprogram where the
television does it all automatically.
• The TV sets equipped with ATS
(Automatic Tuning System) sorts the
channels regarding the broadcasting
system of your country (optionally).
Identify which channel you are watching
(BBC 1, ITV 1 etc.) and decide which
program number you want it to be.
Use the Program down button
to select PROGRAM NO.
Use the Volume up/down
buttons to select the program
number.
Please Note
If the TV is set to a channel with no signal
the TV will return to standby after 5
minutes. The time remaining is displayed
on the screen.
Use the Program down button to
select STORE. Press the OK
button and STORED will appear
on the STORE line.
Manual Tuning
Tuning the TV is accessed through the
SETUP menu.
You have now stored the first
channel.
Use the Program up button to
select again SEARCH and
continue the tuning procedure
until you have tuned in all the
programmes you want or the
television can receive.
To access the SETUP menu:
Press the MENU button twice. SETUP
Menu will appear.
SETUP
CHANNEL
SYSTEM
C 26
BG
0
FINE TUNE
SEARCH
b) If you know the channel number.
(Tuning with channel numbers)
Enter the SETUP menu by pressing MENU
button twice.
AUTOPROGRAM
CHILD LOCK
PROGRAM NO
STORE
OFF
P6
0
9
C/S
NEXT MENU
Press the OK button to select “S”
for cable channels and “C” for
terrestrial broadcast.
a) If you don’t know the channel
number (Tuning with SEARCH
function).
Use Volume up/down button to
select the channel number or enter
the channel number using the
Numeric buttons.
Enter the SETUP Menu by pressing the
MENU button twice.
In the SETUP Menu select
PROGRAM NO and change to P1
using the Program down button to
select it and the Volume up or
Volume down button to change it.
Use the Program down button
to select PROGRAM NO.
7
Enter the desired program number
by using the Ten key program
buttons
Please Note:
a) On the TV sets equipped with ATS a
COUNTRY SELECTION menu will
appear.
Use the Volume up/down buttons
to select the program number.
Select the desired country using Program
and Volume buttons.
Use the Program down button
to select STORE. Press the OK
button and STORED will appear
on the STORE line. The channel
will be stored with the program
number you desired.
Press the OK button to select the country
and press the OK button again the
Automatic Tuning System regarding
the broadcasting system in the desired
country.
b) On the TV sets without ATS pressing
the OK button starts AUTOPROGRAM.
You have now stored the first
channel.
When you are sure the aerial is
connected properly press the OK
button and to confirm it press
OK button again.
Use the Program up button to
select again CHANNEL and
continue the tuning procedure until
you have tuned in all the
programmes you want or the
television can receive.
To cancel Autoprogram whilst it is
working press the Menu button.
As Autoprogram stores a channel
it will appear briefly on the screen.
To exit the SETUP menu press
the TXT button.
Your TV is now tuned and ready to use.
Please note
Please note:
The system will displayed automatically
on SYSTEM row i.e.BG, L, I, DK
depending the receiving broadcasting
system of the country. In some countries
the broadcasting system can be both in
BG/DK or BG/LL´.Only the TV sets
produced with Pal Secam BG/DK or Pal
Secam BG/LL´ systems can receive both
BG/DK or BG/LL´ broadcasts.
If auto sort fails to arrange the programmes
in the required sequence please refer to
programme organising. See the Program
Organising.
Fine Tuning
Although the search and Autoprogram
will automatically try and tune to the
best reception, in areas of poor reception
a bit of fine tuning may be required.
Please note
If you do not press any buttons for 15
seconds the TV will exit the menu system.
In the SETUP menu use the
Program down button to select
FINE TUNING. Use the Volume
up and Volume down buttons to
fine tune.
Automatic Tuning (Autoprogram)
Enter the SETUP menu as before.
SETUP
CHANNEL
SYSTEM
C 26
BG
0
When you have finished use the
Program down button to select
STORE and press the OK button.
FINE TUNE
SEARCH
AUTOPROGRAM
CHILD LOCK
PROGRAM NO
STORE
OFF
P6
0
9
C/S
NEXT MENU
Use the Program down button to
select AUTOPROGRAM and
press the OK button.
8
Child lock
Press the Blue button again to
store the name.
Childlock switches off the programme you
are watching when you select it. All other
programmes are unaffected. If you go
back to the programme with childlock on
you will see a black screen with the OSD
Repeat this process to name all
the programmes.
Please Note
showing (
programs as you want.
) . You can lock as many
Some TV channels may send their
names with teletext transmission. In this
case their names will be automatically
shown on the name line.
Press the Volume up button to
switch the Child lock on or off.
To move the programmes
You can move the programmes around
the programme list to the order you want
Program organising
Once you have tuned in all the channels
you want, you can change their
programme number, if required, and name
them.
Select the programme you want
to move and press the Green
button. The programme will turn
to green.
To enter the SORTING menu
press the OK button.
Select the number you want to move the
programme to and press the Green button
again and the programme will be moved
to that number.
SORTING
P 00
P 01
P 02
P 03
P 04
P 05
P 06
P 07
P 08
P 09
TRT1
ATV
All the following programmes are shifted
down by one place.
SKIP
To delete a programme
MOVE
DELETE
NAME
To delete a programme, select it
and press the Yellow button,
the programme will be deleted.
All the following programmes are
shifted up by one position.
PROGRAM 01 will be selected and the
channel stored under PROGRAM 01 will
be showing on the screen.
The details of the program will be shown
across the top of the screen i.e. P1
CH31.
To skip the programme
Press the Red button, the selected line will
turn red. Skipped programmes will not
appear when you move through the
program list using the Program up or
Program down buttons.
The buttons used to edit the programs
are shown at the bottom of the display:
-
-
-
Red button Skip
Green button Move
They can still be selected using the numeric
buttons or OK of button.
Yellow button Delete
Blue button
-
Name
Press the Red button again to unskip the
programme.
To name the programmes
Press the Blue button, the
selected line will turn blue and
the CH will be highlighted.
Use the Program up and
Program down buttons to select
the letters and numbers and the
Volume up and Volume down
buttons to move through the
name.
9
• Features Menu
To reach the feature menu press three
times to MENU button.
ꢅ
TV set up
TheTV set up is accessed through a menu
system.
FEATURES
SLEEP TIMER
ON TIMER
AVL
OFF
OFF
ON
Once you have stored your set up, this
is the set up the TV will default to when
you switch it on.
LANGUAGE
EXIT
Please note
If you do not press any buttons for 18-19
seconds the TV will exit the menu system.
a) Sleep Timer
The sleep timer automatically switches
the set to stand-by after the preset time
has elapsed.
There are three menus;
• Picture Menu
• Setup Menu
You can select the time from 15 to 120
minutes with 15 minutes steps.
• Features Menu
• Picture Menu
To reach the picture menu press one time
to MENU button.
There are two ways to set the sleep timer;
1- Select the SLEEP TIMER in the
FEATURES menu. Select the desired time
by using Volume down or Volume up
buttons.
PICTURE
BRIGHTNESS
CONTRAST
COLOUR
SHARPNESS
STORE
2- You can also use the YELLOW (
)
button on your remote control to select
this function. You can increase the switch
off time interval by pressing this button
repeatedly.
NEXT MENU
The picture menu allows you to set up
the following:
BRIGHTNESS
CONTRAST
COLOUR
SHARPNESS
Notes:
The last 60 seconds of the desired switch
off time by counting from
59 down.
When this time interval has elapsed the
set will switch to STAND-BY.
To change, for example, the
colour, select it using Program
down buttons.
To view the remaining sleep time, press
YELLOW ( ) button. To cancel the sleep
time select OFF in SLEEP TIMER.
Use the Volume up and Volume
down buttons to change the
setting.
b) On Timer
To save your settings, select
STORE and press the OK button.
STORED will be displayed.
You can select the on time between 30
minutes to 12 hours by pressing numeric
buttons or AV button.
Note:
If you play NTSC formatted tape from
the scart, the TINT menu will appear to
adjust the TINT level.
If TV is at Stand-by position, you can
switch it on at desired time and programme
by activating the ON TIMER feature.
To cancel the on time select off in ON
TIMER.
• Setup Menu
Setup Menu is explained on the page 8
10
c) AVL:
Picture format
TV transmitters have different sound levels.
AVL (automatic volume limiting) maintains
the same sound level as you switch from
program to program.
This allows you to select the picture of
your TV.
Avaible formats of TV sets are 4:3 and
16:9.
From the features menu you can select
AVL button by pressing Program down
button.
To supply this press Volume up or down
button and select ON for AVL.
You can change the picture format to
16:9 to able to watch the inputs in 16:9
format, i.e. some broadcasts and DVD’s
by pressing 16:9 button.
FEATURES
SLEEP TIMER
ON TIMER
AVL
OFF
OFF
ON
LANGUAGE
EXIT
Press the 16:9 button to see the
chosen format on the lower center
right side of the screen and press
the 16:9 button again to change
the picture format.
d) Language
There are many languages available for the
On Screen Displays (OSD).
Normalization
• Whilst watching TV you may change the
In the features menu select
Language by program down
button.
picture While restore the original picture
setting press the BLUE
the remote control.
button on
Press the OK button to select
the language list.
Press the Program up/down
or Volume up/down buttons to
page through all the languages
and OK to select.
11
Using Teletext
Teletext is an information system that
displays text on your TV screen. Using
the teletext control buttons you can view
pages of information that are listed in the
teletext index (Teletext reception is
optional).
Page search whilst watching TV
In Text mode press the Update
button. The TV will return to TV
mode with the text page number
in the top left hand corner of the
screen.
Please Note
Enter the page number you want
using the Numeric buttons.
The top line of the text page will
appear whilst the text searches for
your page. When the page is found
the number will remain in the top
left hand corner of the screen.
No on screen display is available in text
mode. The contrast, brightness and colour
cannot be changed but the volume control
is still available.
To enter Text mode
Please Note
Make sure the TV channel you are
watching transmits teletext.
Press the Update button to view
your selected page of text.
Press the TXT button. The text
page will appear, normally the
index page.
Double height text
If you have difficulty reading the
text on the TV you can double the
height of the text.
To exit Text mode
Press the TXT button. The TV
will return to the channel you were
watching.
Press the Double button. The top
half of the page will be displayed
in double height text.
To select a page of text
Find the number of the page in
the index and enter it using the
Numeric buttons. The number of
the page will appear in the top
left hand corner of the screen.
Press the Double button again.
The bottom half of the page will
be displayed in double height text.
Press the Double button again to
return to the full page.
The page counter will search for
your page. When it finds it, the
page will be displayed.
Page hold
To move to the next page of text
press the Program up button.
If the page of text you have
selected contains sub pages,
these sub pages will automatically
be displayed in order with a delay
to allow you to read the page.
To move to the previous page
press the Program down button.
To stop the move to the next sub
page press the Stop button.
STOP will appear in the top left
hand corner.
TV/text mix
To view a page of text whilst
watching a TV programme press
the Mix button. The text will be
superimposed over the TV
programme.
To continue moving through the
sub pages press the Stop button
again.
Press the Mix button again to
return to the text page.
12
To select a sub page
If the page of text you are viewing
Connecting
contains sub pages, the number
of the sub page you are on and
the total number of sub pages is
displayed on the right of the screen
i.e. 1/7.
external equipment
You can connect a wide range of audio
and video equipment to your TV.
To select a sub page press the
Sub button. The number in the
top left hand corner will be
replaced by S followed by 4
asterisks.
Headphones
The headphones must have an impedance
of between 8 and 32 ohms and have a
3.5 mm stereo jack plug.
Plug the headphone jack into the
headphone socket of the TV.
Enter the number of the sub page,
using the Numeric buttons in the
format S0001 for sub page 1.
Connecting Video Recorder,
DVD Player, Decoder.
Via SCART
The teletext will search for the
sub page. This may take some
time. To return to the TV whilst
the teletext is searching press the
Update button.
Make sure the TV and video recorder are
both switched off.
Plug one end of the SCART lead (not
supplied) into the back of the video
recorder and the other end into the SCART
socket on the back of the TV.
When the page number is found
it will appear in the top left hand
corner of the screen.
Switch on the video recorder and the TV.
Press the AV/TV button on the
remote control to select AV1.
Press the Update button again to
view the text page.
Please note:
You can connect a RGB external
equipment
via Scart 1. It is necessary to use full
Scart cable for this purpose.
To reveal information
Press the Reveal button to reveal
concealed information (quiz
answers etc.).
Select the video outputs of external device
by using its menu to RGB if it’s available.
Press the Reveal button again
to conceal the information again.
You can also play NTSC formatted tape
from scart (Optional).
Clock
Press the Sub button, whilst
watching aTV program , to display
the time.
S-Video Player
If you have an S-Video player you can
connect it to SCART socket 1via an adaptor
from scart to S-Video/RCA audio (not
supplied).
Fastext
Press the AV/TV button two times
to select AV1 S-VHS.
At the bottom of the teletext screen is a row
of subject headings in red, green yellow and
blue.
The remote control has a row of coloured
buttons corresponding to the row of
coloured subjects on the screen.
Pressing one of the coloured buttons will
take you directly to the page corresponding
to the subject heading.
Via RCA lead
Make sure the TV and video recorder are
both switched off.
Plug one end of the RCA lead into the video
and audio out sockets on the back of the
video recorder and plug the other end into
the video and audio in sockets of the TV.
13
Via aerial socket (Only for Video Recorder)
Make sure the TV and video recorder are both switched off.
Unplug the aerial lead form the TV and plug it into the aerial socket on the video
recorder (if fitted).
Plug a coaxial plug into the RF out socket on the rear of the video recorder and plug
the other end into the aerial socket of the TV.
Switch on the video recorder and the TV.
If your video recorder has a test signal, switch it on. (Refer to the video recorder user
guide).
See ‘Tuning the TV’ and carry out the tuning procedure for the video recorder test
signal. Select a programme number 0 or between 55 and 99.
Audio In
AUDIO
Video In
VIDEO
21 pin SCART
connector
to 21 pin SCART
input on TV
VIDEO RECORDER
or
DVD PLAYER or DECODER
Connecting TV with camcorder
AV1
Connecting TV games and computer
AV1
AUDIO
Audio In
AUDIO
Audio In
Video In
Video In
VIDEO
VIDEO
Camcorder
Connecting TV with video and satellite/digital receiver
14
Help and service
tips
No sound
The TV does not work
• Is the sound muted? Press the Mute
button.
Make sure it is plugged into the mains
supply and switched on.
•
•
Is the volume turned down?
Are there headphones connected?
Poor picture
• Is the aerial plugged in?
Sound coming from only one speaker
• Is the balance set to one side? See
the sound menu.
•
If you are using a set top aerial is it
properly aligned for the best signal.
• Make sure the aerial is not to close to
neon lights, loudspeakers etc.
• If you have external speakers, has one
of
them become disconnected.
• Try changing the direction of the outdoor
aerial. High buildings and mountains
can cause ghost pictures or double
images.
No response to the remote control
• Try changing the batteries.
•
Is there an obstruction between the
• The picture quality may be reduced by
connecting two external sources at once.
Disconnect one of the sources.
• Adjust the fine tuning.
remote control and the sensor on the TV.
If nothing works
If you have tried the above solutions and
none seem to work, try switching the unit
off and on again.
No picture
•
•
Is the aerial plugged in properly?
Is the aerial lead damaged?
If this does not work contact your supplier
or TV repair technician. Never attempt
to repair a defective TV yourself.
• Are all the plugs in the aerial lead fitted
correctly?
• Have you pressed the correct buttons
on the remote control?
15
Technical specifications table
Picture tube
size/type
14”
4:3
15”
PF
20”
4:3
21”
4:3
21”
PF
Screen size
37 cm
34 cm
2 W
38 cm
36 cm
2,5 W
45 W
4 W
51 cm
48 cm
2,5 W
45 W
4 W
55 cm
51 cm
2,5 W
45 W
4 W
55 cm
51 cm
2,5 W
45 W
4 W
Visible
screen size
Sound Output
(%10 THD)
Power
consumption
30 W
4 W
Stand by
Power
consumption
General technical specifications
Power Supply
AC:.............................................................230-240V 50Hz
Number of preset programmes...............100
RF Aerial input..........................................75 ohm (unbalanced)
Speaker empedance.................................8 ohm
Audio output ............................................Mono
Batteries....................................................2xAAA
Receiving channels..................................VHF (Band I Channels 2-4)
....................................................................VHF (Band III Channels 5-12)
....................................................................UHF (Channels 21-69)
....................................................................Cable TV (S1-S20/S21-S41)
Receiving broadcast system....................
PAL BG
PAL SECAM BG
PAL SECAM BG DK/DK'
PAL SECAM BG LL’
PAL I
Please note:
Your TV set is produced to receive only “one “ of this colour and sound system
options which is based one your countries norms and can not be changed by user
except BG/DK and BG/LL´ if both systems are avaible to receive (BG or DK and BG
or LL´). Please refer to “Tuning the TV”.
16
|