1
Specifications
Throat Diameter
36 mm (1.4 in)
Nominal Impedance
8 Ω
8 Ω
Minimum Impedance
Power Handling
(1000 –20000 Hz)
Nominal2
80 W
160 W
107 dB
Continuous Program3
Sensitivity (1W/1m)4
Frequency Range
0.5 – 18 kHz
1000 Hz
75 mm (3 in)
Aluminium
0.14 mH
Recommended Crossover5
Voice Coil Diameter
Winding Material
Inductance
Diaphragm Material
Flux Density
Also available in 16 Ω, data upon request
Titanium
1.8 T
Mounting and Shipping Information
Four M6 holes 90° on 102 mm (4 in) diameter
Overall Diameter
Depth
Net Weight (1 unit)
Shipping Weight (2 units)
Shipping Box (2 units)
170 mm (6.7 in)
67 mm (2.6 in)
4.5 kg (9.9 lb)
9.6 kg (21.2 lb)
210x210x190 mm
(8.3x8.3x7.5 in)
1 Driver mounted on B&C ME 90 horn.
2 2 hours test made with continuous pink noise signal (6 dB crest factor) within
the specified range. Power calculated on rated minimum impedance.
3 Power on Continuous Program is defined as 3 dB greater than the Nominal rating.
4 Applied RMS Voltage is set to 2.83V for 8 ohms and 4V for 16 ohms Nominal
Impedance. Average SPL from 500 to 18000 Hz.
DE 82 | Hf Compression drivers
5 12 dB/oct. or higher slope high-pass filter.
1.4" high frequency compression driver. The particular
mylar/titanium diaphragm using a 3" edgewound flat aluminium
wire voice coil and a optimized high energy ceramic magnet
assembly using a copper shorting ring assembly produce smooth
response and excellent sonic properties .
|