REMINISCENCE™
COUNTERTOP SINK
VITREOUS CHINA
BARRIER FREE
REMINISCENCE™ COUNTERTOP SINK
• Vintage-styled design with raised motif backsplash
• Made from vitreous china
• Self-rimming with cutout template supplied
• Design matched to Reminiscence toilet
• Front overflow
• Faucet ledge
Shown with 3801.452 Amarilis Jasmine
faucet and handles (not included)
❏ 0511.800 Faucet holes on 8" (203mm) centers
(illustrated)
❏ 0511.400 Faucet holes on 4" (102mm) centers
❏ 0511.100 Center hole only
Nominal Dimensions:
565 x 457mm
(22-1/4" x 18")
FINISHED WALL
OR SPLASHBACK
203mm
(8)
OPTIONAL
10mm
(3/8)
108mm
(4-1/4)
Bowl sizes:
206mm
(8-1/8)
419mm (16-1/2") wide
254mm (10") front to back
152mm (6") deep
457mm
(18)
C/L
Compliance Certifications -
Meets or Exceeds the Following Specifications:
• ASME A112.19.2M for Vitreous China Fixtures
565mm
(22-1/4)
COUNTERTOP
(BY OTHERS)
SEALING
COMPOUND
To Be Specified:
❏ Color: ❏ White ❏ Bone ❏ Linen
❏ Silver ❏ Fawn Beige ❏ Black
❏ Faucet*:
25mm
(1)
83mm
(3-1/4)
❏ Faucet Finish:
❏ Supplies:
❏ 1-1/4" Trap:
152mm
(6-3/4)
260mm*
(10-1/4)
787mm
(31)
311mm*
(12-1/4)
SUPPLIES
AS REQ'D
* See faucet section for additional models available
203mm
(8)
178mm
(7)
1-1/4 O.D.
WASTE
FINISHED
FLOOR
1-1/4 O.D.
TAILPIECE
NOTES:
DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND “P" TRAP
*
ARE SUGGESTED.
FITTINGS NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED
SEPARATELY.
FOR COUNTERTOP CUTOUT AND INSTALLATION INSTRUCTIONS USE
TEMPLATE SUPPLIED WITH SINK.
SEALING COMPOUND SUPPLIED BY OTHERS.
IMPORTANT: Dimensions of fixtures are nominal and may vary within the
range of tolerances established by ANSI Standard A112.19.2.
These measurements are subject to change or cancellation. No responsibility
is assumed for use of superseded or voided pages.
J25
© 2008 AS America Inc.
Revised 2/08
|