ROSELYN™
COUNTERTOP SINK
VITREOUS CHINA
BARRIER FREE
ROSELYN™ COUNTERTOP SINK
• Made from vitreous china
• Self-rimming with cutout template supplied
• Front overflow
• Faucet ledge
Shown with 7411.712 Hampton faucet with
porcelain handles (not included)
❏ 0498.800 Faucet holes on 8" (203mm) centers
❏ 0498.400 Faucet holes on 4" (102mm) centers
(illustrated)
❏ 0498.001 Center hole only
Nominal Dimensions:
521 x 445mm
(20-1/2" x 17-1/2")
610mm
(24)
102mm (4)
OPTIONAL
51mm
(2)
Bowl sizes:
419mm (16-1/2") wide
267mm (10-1/2") front to back
70mm
(2-3/4)
181mm
(7-1/8)
FINISHED
WALL
OR
146mm (5-3/4") deep
SPLASH BACK
DRAWING FOR
DIMENSIONAL
PURPOSES ONLY.
IT IS NOT AN EXACT
REPRESENTATION.
203mm
(8)
MIN.
445mm
(17-1/2)
C/L
Compliance Certifications -
Meets or Exceeds the
Following Specifications:
851mm
(33-1/2)
8mm
• ASME A112.19.2M for
Vitreous China Fixtures
(5/16)
TYP.
686mm
(27)
MIN.
521mm
(20-1/2)
152mm
(6)
MAX.
SEALING COMPOUND
COUNTERTOP (BY OTHERS)
13mm
(1/2)
BARRIER FREE
CLEARANCE
229mm
(9)
MIN.
*248mm
(9-3/4)
178mm
(7)
318mm
*
(12-1/2)
SUPPLIES
AS REQ'D.
203mm
(8)
178mm
(7)
To Be Specified:
❏ Color: ❏ White ❏ Bone
❏ Linen ❏ Silver
❏ Fawn Beige ❏ Black
❏ Faucet*:
1-1/4 O.D.
WASTE
787mm (31)
851mm (33-1/2)
1-1/4 O.D.
TAILPIECE
FINISHED
FLOOR
❏ Faucet Finish:
❏ Supplies:
❏ 1-1/4" Trap:
* See faucet section for additional models available
NOTES:
MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES
AND ANSI A117.1 ACCESSIBLE AND USABLE
BUILDINGS AND FACILITIES - CHECK LOCAL CODES.
Install lavatory 864mm (34") from finished floor.
Lavatory installed 51mm (2") minimum from front edge
of countertop provides 686mm (27") knee clearance.
DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND “P" TRAP ARE
*
SUGGESTED.
FOR COUNTERTOP CUTOUT AND INSTALLATION INSTRUCTIONS USE
TEMPLATE SUPPLIED WITH SINK.
FITTINGS NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED
SEPARATELY.
SEALING COMPOUND SUPPLIED BY OTHERS.
IMPORTANT: Dimensions of fixtures are nominal and may vary within the range
of tolerances established by ANSI Standard A112.19.2.
These measurements are subject to change or cancellation. No responsibility is
assumed for use of superseded or voided pages.
J37
© 2008 AS America Inc.
Revised 2/08
|