GREEN TEA™ 6' x 42"
WHIRLPOOL AND BATHING POOL
HIGH GLOSS
GREEN TEA™ 6' X 42" WHIRLPOOL
❏ 3575.018WC Whirlpool featuring System I
• Acrylic with fiberglass reinforcement
• Pre-leveled tub bottom
• Form-fitted backrest position
• Raised neck support
• Dual, molded in arm rests
• 2.1 HP single speed, self-draining pump/motor
• Factory installed power cord with plug
• Ten multi-directional and flow-adjustable jets
• Side-mounted air switch On/Off
• Can be under-mount installed
• Two silent air volume controls
• Quick Connect Safe-T-Heater
connection system
• Factory installed and tested whirlpool system
• EverClean™ whirlpool system
❏ 3575.002 Bathing Pool
• Same as above without whirlpool system
Nominal Dimensions:
1829 x 1067 x 533mm
(72" x 42" x 21")
To Be Specified - Required:
❏ Color:
❏ Bath Filler: (specify finish)
❏ Bath Drain: 1583.470 (specify finish)
Compliance Certifications -
Meets or Exceeds the Following Specifications:
• Underwriters Laboratories - Hydromassage
Bathtubs UL 1795
• ASME A112.19.7M for Whirlpool Appliances
• ANSI Z124.1 for Plastic Bathtubs
• ASTM E162 for Flammability
To Be Specified - Optional:
❏ Safe-T-Heater*: 9075.120
❏ Jet Trim Ring Kit: 9860.200-two per kit (Specify finish)
for Body Massage Jets only
❏ Universal Tile Bead Kit: 751755-100
• NFPA 258 for Smoke Density
The EverClean™ system incorporates AlphaSan®, a
patented antimicrobial agent manufactured right into the
circulation system components, which suppresses the
growth of unsightly algae, fungus, mold and mildew.
For color/finish availability and other faucet choices, please
see the Product Selector and Pricing Guide.
* NOTE: the Safe-T-Heater is designed to maintain water
temperature during operation. It will not heat cold water to
desired bathing temperature.
SEE REVERSE FOR ROUGHING-IN DIMENSIONS AND
PRODUCT SPECIFICATIONS
AlphaSan is a registered trademark of Milliken & Co.
H9
© 2007 American Standard Inc.
Rev. 11/07
|