Allied Telesis Network Card AT 2701FTX User Manual

Datasheet | Network Interface Cards  
AT-2701FTX  
PCI 32-bit Fast Ethernet Fiber Network Interface Card  
AT-2701FTX  
100Mbps Fast Ethernet dual fiber  
and copper 100TX interface card  
Advanced Manageability  
AlliedTelesis’ AT-2701FTX features a full-line of  
card assistant software:  
Key Features  
Management Software  
VLAN support  
AT-Setup reduces Window Driver installation to  
a mouse click.This Windows program guides  
users through driver installation, updates, and  
problem corrections.  
Choice and Flexibility  
Link aggregation  
Failover  
AlliedTelesis’ AT-2701FTX is the answer for  
those fiber interface cards that support Wake-  
on-LAN (WoL) for either PCI 2.1 or PCI 2.2  
systems but not both. AlliedTelesis’ NICs  
support WoL through the PCI 2.2 bus and  
support PCI 2.1 WoL via external cables.  
Resistant to signal degradation, snooping, and  
interference, the AT-2701FTX is the ideal  
solution for networks requiring protection from  
electrical interference and hackers.The small  
footprint—together with the low-profile option  
of the AT-2701FTX—make these products a  
perfect choice for PCs equipped with small  
desktop solutions.  
AT-Stat is an advanced Windows application  
that reports network conditions and  
performance such as hardware resources,  
network statistics, and configuration.  
Advance Properties  
PCI 2.2 compliant  
Wake-on-LAN (WoL)  
Secured transmissions  
Advanced installation utility  
Advanced diagnostics  
Remote boot (PXE 2.1)  
TCP/IP checksum off-loading  
Priority queuing  
TheVLAN protocol driver allows network  
administrators to configure theirVLAN network  
fabric at the PC instead of the switch, enabling  
transparent movement of systems between  
switches.  
TCP/IP checksum off-loading improves CPU  
use by verifyingTCP/IP traffic checksums at the  
interface card rather than at the host processor,  
improving overall system performance for  
slower PCs.  
Packet prioritization enables Windows  
Driver support for popular operating systems  
including Sun Solaris  
applications with Class of Service capabilities to  
prioritize out-bound packet streams to these  
NICs, a useful feature for video streaming and  
VoIP where interruptions are unacceptable.  
Available with SC, ST, or MT-RJ connections  
Compliant with theTrade Agreement Act  
Microsoft certified drivers  
The AT-2701FTX’s onboard Managed Boot  
Agent (MBA) provides a wide set of industry-  
standard boot protocols, including PXE,  
NetWare NCP/IPX, IBM’s RPL, traditional  
DHCP, and BOOTP, supporting both BBS (BIOS  
Boot Specification) and non-BBS compliant PCs.  
It also includes an extensive set of utilities for  
boot ROM configuration, as well as access to  
pre-OS and network boot image files.  
RoHS compliant  
Low-profile and standard height brackets  
included  
IPv6  
Offering a wide range of connector choices—  
ST, SC, or MT-RJ—these cards meet the  
requirements of most fiber installations.  
Also can be used in PCI-x bus  
Allied Telesis  
 

AEG Ventilation Hood 8609 D User Manual
Aero Mist Fan 67014 User Manual
Aiphone Intercom System CC 1M User Manual
AKG Acoustics Headphones K240S User Manual
Allied Telesis Switch AT FS705L User Manual
Alpine Car Stereo System DVI 9990 User Manual
ATI Technologies Tiller 365 User Manual
Axis Communications Security Camera ptz dome network camera User Manual
Bakers Pride Oven Gas Grill CG User Manual
Beko Refrigerator CDA671F User Manual