Table of Contents
Safety
Electrical safety
………………………………………………………………
………………………………………………………………
………………………………………………………………
………………………………………………………………
………………………………………………………………
………………………………………………………………
………………………………………………………………
………………………………………………………………
………………………………………………………………
………………………………………………………………
………………………………………………………………
………………………………………………………………
………………………………………………………………
………………………………………………………………
………………………………………………………………
………………………………………………………………
………………………………………………………………
1
1
1
1
2
2
3
3
3
4
5
7
8
8
8
8
9
Installation safety
Cleaning safety
Special notes on LCD monitors
Package contents
Installation instructions
Placement
Installation
External controls
Image adjustment
Screen adjustment
Attachments
Plug and play
Power saver
Troubleshooting
Technical specifications
Display modes
……………………………………………………………… 10
Special notes on LCD monitors
The following symptoms are normal for LCD monitors and do not indicate a problem with the device:
ꢀ
Due to the nature of the fluorescent light, the screen may flicker during initial use. Turn off the
power switch and then turn it on again to make the flicker disappear.
ꢀ
ꢀ
You may find slightly uneven brightness on the screen depending on the desktop pattern you use.
The LCD screen has effective pixels of 99.99% or more. It may include blemishes of 0.01% or less
(caused by a missing pixel or a pixel that is always lit).
ꢀ
When the same image is displayed for hours on end, its afterimage may remain after switching to a
new image. When this happens, the screen will recover slowly by changing the image. Turning the
LCD monitor off for several hours will also correct this problem.
Package contents
LCD display
D-Sub signal cable
DVI signal cable
(optional)
Quick Start Guide
(with speakers)
Power cable
Audio cable
User's Guide (CD)
2
Installation instructions
Note: Read the Safety section carefully before starting the installation.
When installing your LCD monitor, consider the placement of the monitor:
Placement
ꢀ
To minimize the reflection of the monitor, protect your eyes, and ensure premium
quality, don’t install your LCD monitor near windows or where there is backlight. Keep
the monitor at least 30 cm away from your eyes.
ꢀ
ꢀ
The upper edge of the monitor should be just a little higher than your line of sight.
Adjust the front and back dip angles of the monitor, so that you can view the display
comfortably.
Connecting the base to the monitor
Installation
Take the base out of the box and place it on a flat table.
ꢀ
ꢀ
Position the monitor on top of the base.
Connect the base into the neck of the monitor
along the track.
ꢀ
You will hear a click sound when the base and the
monitor are properly connected.
Connecting the LCD monitor to a PC
ꢀ
ꢀ
ꢀ
Make sure that the power supply of your PC is
turned off and the power plug is removed.
Connect and fasten both ends of the signal cable to
your PC host and LCD monitor, respectively.
If your LCD monitor has built-in speakers, connect
the audio cable attached to the monitor from the
sound card output of your PC to the audio input on
the back of your LCD monitor.
ꢀ
Connect the attached power cable to your LCD
monitor.
ꢀ
ꢀ
Plug the power cable into the receptacle.
Use the cable tie to bind up the power cord and the
D-sub signal cable / DVI-D cable.
ꢀ
Turn on the power supplies of your PC and LCD
monitor.
X Power cable
Y Audio cable
Z DVI signal cable (optional)
[ D-Sub signal cable
3
External
controls
Power On/Off
Green indication: Power is on and normal.
Orange indication: Sleep status in the energy-saving mode.
Colorless indication: Power off.
1
Power source
2
3
Menu
>
OSD Menu
Plus
Press this button to enter OSD. Press it again to exit OSD.
Press this button for selection or adjustment when OSD is
started.
Press this button and click < and > to adjust volume when OSD
is not started (for the model with speakers only).
4
5
<
Minus
Press this button to exit the manual when OSD is started.
Press this button for the display to optimize the position, phase
and clock pulse automatically when OSD is not started.
Automatic
adjustment
Auto
(For models with
speakers)
6
Speaker
4
The image settings of your LCD monitor were adjusted to their optimal status for analog TV
Image
adjustment before shipment. (See Page 9). If you want to adjust the image settings to suit your personal
for analog
preference, follow the steps below:
1.
2.
Click Menu to display the OSD window as shown in the following figure.
Click Plus or Minus to select the function to be adjusted as shown in the following
figure.
3.
4.
5.
Click the Menu again to select the function to be adjusted.
Click Plus or Minus to change current settings.
To exit the OSD window, select " " to close and save changes. To change other
settings, repeat steps 2-4.
Bright/Contract Adjustment
Phase/Clock pulse Adjustment
Horizontal/Vertical Adjustment
Color Temp. Adjustment
Language Selection
OSD Setting
Auto Adjustment
Message
Restore
Exit
(Analog)
5
The image settings of your LCD monitor were adjusted to their optimal status for digital TV
Image
adjustment before shipment. (See Page 9). If you want to adjust the image settings to suit your personal
for digital
preference, follow the steps below:
1.
2.
Click Menu to display the OSD window as shown in the following figure.
Click Plus or Minus to select the function to be adjusted as shown in the following
figure.
3.
4.
5.
Click the Menu again to select the function to be adjusted.
Click Plus or Minus to change current settings.
To exit the OSD window, select “ ” to close and save changes. To change other
settings, repeat steps 2-4.
Bright/Contrast Adjustment
Phase/Clock Pulse Adjustment
Horizontal/Vertical Adjustment
Color Temp. Adjustment
Language Selection
OSD Setting
Input Selection
Message
Restore
Exit
(Digital)
6
Screen
adjustment
Function Definition
Primary
directory
symbol
Secondary
directory
symbol
Secondary directory
items
Description
Adjusts the contrast between the foreground and
background of an image on the screen.
Contrast
Brightness
Phase
Adjusts the background brightness of the screen.
Adjusts the focus of the image
(for analog input adjustment only).
Adjusts the clock pulse of the image
(for analog input adjustments only).
Clock pulse
Horizontal
Vertical
Moves the image left and right on the screen
(for analog input adjustments only).
Moves the image up and down on the screen
(for analog input adjustments only).
Warm color
temperature
Cold color
N/A
N/A
Sets the color temperature to warm white.
Sets the color temp to cold white.
temperature
User Definition/Red
User
Definition/Green
Adjusts red/green/blue gain.
User Definition/Blue
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
English
繁體中文
Deutsch
Français
Español
Italiano
Used to select the language you want.
简体中文
日本語
Hollands
Suomalainen
Русский
Horizontal
Moves OSD left and right.
Vertical
Moves OSD up and down.
OSD time display
Adjusts OSD time display settings.
Sets up horizontal, vertical, sequence and focus
automatically (for analog input only).
N/A
Auto adjustment
Used to select the input source you want (for DVI
input only).
N/A
N/A
Analog digital
Message
Display resolution, H/V frequency and the input port
used for current input timing function.
N/A
N/A
Restore
Exit
Restores system to default settings.
Closes the OSD window and saves changes.
7
Attachments
Plug and play ꢀ
The product provides the latest VESA plug and play feature to prevent complicated
and time-consuming installation procedures. The plug and play feature allows your
computer system to identify the LCD monitor easily and set up its functions
automatically.
ꢀ
The LCD monitor transfers the Extended Display Identification Data (EDID) to your
computer system via the Display Data Channel (DDC), so that your computer can
use the self-setting function of the LCD monitor.
ꢀ
The LCD monitor has a built-in Power Control System (Power Saver).
When the LCD monitor is not operated for a period of time, the Power Control
System automatically sets the system at low voltage status to save power. Move the
mouse slightly or press any key to return to normal operation.
The Power Saver function can only be operated by the display card of the computer
system. You can set up this function from your computer.
Power saver
ꢀ
ꢀ
ꢀ
ꢀ
The LCD monitor is compatible with EPAENERGY STAR NÜTEK when used with
VESA DPMS.
To save power and extend the life of the product, turn off the LCD monitor power
supply when it is idle for a long time or not being used.
Troubleshooting
Power LED does ꢀ
Check that the power switch is turned on.
not light
Icon off
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
Make sure the power cable is connected.
Check that the power switch is turned on.
Make sure the power cable is connected.
Ensure that the signal cable is inserted in the receptacle appropriately.
The Power Saver may turn off the monitor automatically during the operation.
Make sure the monitor is restored when you press any key from the keyboard.
Refer to "Color Temp. Adjustment" to adjust RGB color or select color
temperatures.
Color default ꢀ
Instability or ꢀ
Remove any electronic equipment in the vicinity that may cause EMI interference.
Check the signal cable of the monitor to ensure that none of the pins are bent.
Press the auto adjustment button to automatically optimize the screen.
Set up the reference position.
ripple
ꢀ
Image offset or ꢀ
wrong size ꢀ
8
Technical specifications
Panel dimension
Diagonal 510.3 mm (20.1 inch) LCD monitor
1,400 x 1,050 / SXGA
Max. resolution
Max. pixel
Up to 16.2 M true color
Horizontal 0.291mm x Vertical 0.291mm
300 cd/m2
Pixel span
LCD panel
Brightness
(backlight source)
Contrast
600 : 1
LC response time
Visual angle
Effective display
8 ms
Horizontal 150° / Vertical 130°
Horizontal 408.24 mm x Vertical 306.18 mm
Simulated video frequency: 0.7 Vpp, 75Ω
(separate SYNC and composite SYNC)
Signal mode
Input signal
SYNC frequency
Max. pixel clock
Image
Horizontal 30 kHz – 82 kHz x Vertical 56 Hz – 76 Hz
140MHz
D-Sub 15 PIN (VESA) / DVI-D (Optional)
Phone Jack, d=3.5 mm (Optional)
AC100 – 240 Volts, 50 – 60 Hz
55 W / Standby 1W / Power-Off 1W
5°C – 35°C (operation) / -20°C – 55°C (storage)
20% – 80% (operation) / 20% – 85% (storage)
538 x 158 x 470 mm
Input terminal
Audio
Power transformer
Power consumption
Temperature
Humidity
Environmental
conditions
Actual dimensions (W x D x H)
Net weight
5.3 kg
TCO03;UL/CUL;TÜV-GS;CE/LVD;TÜV-ERGO;CB;CCC;FCC-B;VCCI-B;
CE/EMC;C-Tick; BSMI; ISO 13406-2;EPA;PCT;NOM;WEEE;PSB;HG
Safety standard
Lamp disposal
Lamp(s) inside this product contain mercury and must be recycled or disposed of according to
local, state or federal laws. For more information, contact the Electronic Industries Alliance at
This device complies with Part 15 of the FCC rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
This Class B digital apparatus meets all requirements of the Canadian Interference- Causing
Equipment Regulations.
Cet appareil numérique de la class B respecte toures les exigencies du Réglement sur le materiel
brouilieur du Canada.
9
Display modes
If the signal of your PC system is the same as one of the following reference signal
modes, the screen will be adjusted automatically. If not, the screen will not display or
only the LED lights will display. For more information about the adjustment mode, refer
to the instructions of your display card.
Hor. Frequency Vert. Frequency Pixel Frequency SYNC Polarity
Display Mode
(kHz)
(Hz)
(MHz)
25.175
31.500
31.500
36.000
40.000
50.000
49.500
65.000
75.000
78.750
108.000
108.000
135.000
121.75
28.322
30.240
57.283
80.000
(H/V)
-/-
VESA
VGA 640x480
SVGA 800x600
31.469
37.861
37.500
35.156
37.879
48.077
46.875
48.363
56.476
60.023
67.500
63.981
79.976
65.317
31.469
35.000
49.725
60.150
59.940
72.809
75.000
56.250
60.317
72.188
75.000
60.004
70.069
75.029
75.000
60.020
75.025
59.978
70.087
66.667
74.500
74.720
-/-
-/-
+/+
+/+
+/+
+/+
-/-
XGA 1024x768
-/-
+/+
+/+
+/+
+/+
-/+
-/+
-/-
SXGA 1152x864
SXGA 1280x1024
SXGA+ 1400x1050
720 x 400
VGA TEXT
Macintosh
640x480
832 x 624
-/-
1024 x 768
-/-
Download from Www.Somanuals1.c0om. All Manuals Search And Download.
|