FL1000 High-Density Termination
and Splice Panels
144- and 288-Position 13 RU Panels
144-Position Termination/Splice Panel
Limited floor space often dictates that multiple pieces of communications apparatus share
common equipment racks. The FL1000 panel is an economical solution with fundamental cable
management features.
The 144-position FL1000 termination and splice panel uses ADC’s modular 6pak adapters that can
be ordered through a single catalog number and are shipped in a single package. The 288-position
termination and splice panel is a high-density solution featuring a fixed adapter bulkhead panel
with angled adapter retainers for individual fiber access and bend radius protection. Each 288-
position panel ships with vertical cable guides for managing incoming and outgoing patch cords.
Features and Benefits:
• Fundamental cable management
• Modular, durable 6pak adapters
in an economical solution
are easy to install
• 19- or 23-inch rack mount
• Flush mountable
• LC small-form-factor connectors double
the capacity of the 144-position panel
• Flexible ordering options allow 6paks to be
ordered separately or pre-installed in panel
(144-position only)
• Angled left/right adapters ease fiber bends
and allow individual fiber access
• Removable rear door panel allows
efficient access to interior for routing
and termination fibers
w w w . a d c . c o m
•
+ 1 - 9 5 2 - 9 3 8 - 8 0 8 0
•
1 - 8 0 0 - 3 6 6 - 3 8 9 1
FL1000 High-Density Termination and Splice Panels
144- and 288-Position 13 RU Panels
144-Position Panel Ordering Info
Catalog Number
FL1-
N
–
0
A
B
C
D
E
Panel Type
144-position
6pak Adapter/Connector Type
(Reference placement of 6paks
on back page)
6
termination/splice (13 RU)
Multimode
N
9
6
None/NA
SC
LC1
Singlemode
6pak Adapters and Pigtails
N
7
J
2
8
Z
None/NA
3
4
6
Adapters with pigtails
Adapter-only
Singlemode or multimode
62.5/125 µm 6-fiber stranded
SC ultra polish
SC angled polish
FC ultra polish
LC ultra polish1
LC angled polish1
softwall bundle (12-fiber for LC)
Singlemode or multimode
62.5/125 µm 12-fiber ribbon
Multimode 50/125 µm
9
I
Splice Tray with Chip
stranded softwall bundle
1
2
3
N
Bare fusion
Heat shrink (single fiber fusion)
Mechanical (mass fusion)*
None
Accessories
(Enter the desired quantity 0–9
above the corresponding accessory.)
*For use with ribbon fiber
Cable clamp
Bonding/grounding kit
Radius limiters (set of 2)
1 LC connectors and adapters double the capacity of the panel by terminating two fibers at each adapter.
144-Position Empty Termination/Splice Chassis
O rd e r i n g I n f o r m a t i o n
Description
Panel Height
Catalog Number
Empty termination/splice chassis1
144-position
22.75" (13 RU)
FL1-6
1 LC connectors and adapters double the capacity of the panel by terminating
two fibers at each adapter.
Other configurations are available upon request. Please contact ADC Technical Assistance Center.
w w w . a d c . c o m
•
+ 1 - 9 5 2 - 9 3 8 - 8 0 8 0
•
1 - 8 0 0 - 3 6 6 - 3 8 9 1
3
Accessories
O rd e r i n g I n f o r m a t i o n
Description
Catalog Number
6pak Adapter—Adapter Only
Multimode (62.5/125 µm)
SC
FL2-6MMSC
FL2-6MMFC
FL2-6MMLC
FC
LC*
Singlemode
SC ultra polish
SC angled polish
FC ultra polish
LC* ultra polish
LC* angled polish
FL2-6PSMSC
FL2-6PSMASC
FL2-6PSMFC
FL2-6PSMLC
FL2-6PSMALC
Standard splice tray
Bare fusion
FST-FT
FST-HS
FST-MT
Heat shrink fusion
Mechanical (mass fusion)
Radius limiters
Set of 2 for use with rack mount panels
FL1-ACC002
* LC 6pak adapters accommodate 12 LC connectors.
6pak Adapter Placement
144 Rack Mount
Front View
A
A
B
B
C
C
D
D
D
E
A
A
B
B
C
C
D
D
D
E
E
E
E
E
From North America, Call Toll Free: 1-800-366-3891 • Outside of North America: +1-952-938-8080
Fax: +1-952-917-3237 • For a listing of ADC’s global sales office locations, please refer to our website.
ADC Telecommunications, Inc., P.O. Box 1101, Minneapolis, Minnesota USA 55440-1101
Specifications published here are current as of the date of publication of this document. Because we are continuously
improving our products, ADC reserves the right to change specifications without prior notice. At any time, you may
verify product specifications by contacting our headquarters office in Minneapolis. ADC Telecommunications, Inc.
views its patent portfolio as an important corporate asset and vigorously enforces its patents. Products or features
contained herein may be covered by one or more U.S. or foreign patents. An Equal Opportunity Employer
105373AE 10/07 Original
©
2007 ADC Telecommunications, Inc. All Rights Reserved
|